VietMachine Producing and Trading Co., Ltd. (Ichimens)
Vietnam Stamping Press + Multi-Spindle Automatic Lathe Factory
150-ton stamping press + multi-spindle automatic lathe — both verified on-site by Dewin's Dolphin Audit team. High-volume metal parts. VCCI Form B COO documentation for all major markets. 16+ FTA market access.
Real Factory Photos — Dewin On-Site Audit Visit
All photos taken by Dewin's on-ground team during the 50-point Dolphin Audit. No stock photography. No marketing images.
6 Dewin on-site audit photos · VietMachine Producing and Trading Co., Ltd. (Ichimens) · Vietnam
Dolphin Audit Pillar 2 — Equipment Verification
Dewin's on-ground team physically confirmed the following equipment operational at VietMachine (Ichimens) during the 50-point Dolphin Audit site visit:
✅ 150-Ton Stamping Press Machine — Confirmed
Capacity plate and machine nameplate photographed on-site. Press confirmed operational. 150-ton rating verified — sufficient for steel/aluminum sheet stamping including progressive die, blanking, and forming operations.
✅ Multi-Spindle Automatic Lathe — Confirmed
Multi-spindle automatic lathe confirmed operational and photographed. Multiple simultaneous turning stations verified. Ideal for high-volume shafts, pins, standoffs, inserts — 4–8× throughput vs single-spindle CNC.
Multi-Spindle Automatic Lathe — Quality Signal for Global Buyers
Owning a multi-spindle automatic lathe signals serious production investment and high-volume turning capability. Here's how it compares to alternatives on factors that matter to buyers.
4–8× Production Throughput
A finished part exits every cycle time across all spindles simultaneously — dramatically lower unit cost on runs of 5,000+ pieces. Competitive pricing on high-volume turned parts vs factories using single-spindle CNC lathes.
Dimensional Repeatability
Fixed tooling positions per spindle station minimize diameter, length, and runout scatter across thousands of cycles — tighter part-to-part consistency than manual or semi-automatic turning for the same geometry.
Bar Stock Traceability
Automatic bar stock feed creates sequential lot numbering — every part in a run maps to a specific bar or coil with material certificate. Supports PPAP Level 2 traceability requirements for OEM programs.
| Factor | Multi-Spindle Auto Lathe ✅ | Single-Spindle CNC Lathe | Manual Turning |
|---|---|---|---|
| Parts per hour | 4–8× faster at volume | Moderate — 1 part/cycle | Slow — operator-limited |
| Unit cost at high volume | Very low — simultaneous ops | Moderate | High — labor intensive |
| Dimensional repeatability | Excellent — fixed tooling | Good — program-controlled | Variable — operator-dependent |
| Ideal order volume | 5,000+ pcs/run optimal | Flexible — 100+ pcs | Low MOQ, costly per piece |
| Lot traceability | High — sequential bar lots | Good — program-linked | Poor — manual records |
| Dolphin Audit quality signal | Strong — capital investment | Good — standard CNC | Weak — low capital |
FTA Market Access — Vietnam Stamped & Turned Parts
Vietnam's 16+ Free Trade Agreements give Dolphin-audited factory output preferential access to the world's largest buying markets. VietMachine's VCCI-registered origin supports the full range of CO types below.
US Market
$0 Section 301 Tariff
Vietnam not subject to China-specific Section 301 authority (Trade Act 1974, USTR). VCCI Form B required for COO documentation. Standard MFN duties apply (0–5.7%).
EU 27 Markets — EVFTA
0% or reduced tariff
EU-Vietnam FTA (EVFTA) provides 0% or significantly reduced tariff on qualifying Ch.73/76 stampings and turned parts. EUR.1 movement certificate required from factory.
CPTPP — 11 Nations
0% on qualifying parts
Covers Canada, Australia, Japan, Mexico, Singapore, New Zealand, Malaysia, Brunei, Chile, Peru, Vietnam. CPTPP CO required per shipment for qualifying HTS codes.
UK Market — UKVFTA
0% on qualifying parts
UK-Vietnam FTA (UKVFTA) post-Brexit provides 0% tariff on qualifying Vietnam-origin stampings and turned components to UK buyers. EUR.1 or UKVFTA origin declaration required.
50-Point Dolphin Audit Results — VietMachine (Ichimens)
Dewin's on-ground team physically audited VietMachine (Ichimens) across all 5 Dolphin Audit pillars. Here's what was verified and why it matters for global buyers.
| Pillar | What Dewin Verifies | VietMachine (Ichimens) | Global Buyer Relevance |
|---|---|---|---|
| Pillar 1 Facility & Safety | Factory layout, material flow, fire safety, 5S discipline, welfare, no child or forced labor | ✅ Confirmed — organized production area, main workshop, and production flow observed on-site | ESG-compliant sourcing; organized factories have lower defect rates from contamination and material mix-ups |
| Pillar 2 Equipment & Capacity | Machine make, model, year, capacity rating, operational status, maintenance evidence | ✅ 150-ton stamping press confirmed · multi-spindle automatic lathe confirmed — both photographed operational | Correct press tonnage = correct part forming; multi-spindle lathe = volume turning capability verified — not self-reported |
| Pillar 3 Quality Systems | ISO certs (physical verification vs claimed), inspection equipment calibration, NCR/CAPA system, incoming material inspection | ⚠️ Confirm inspection equipment and calibration records at RFQ stage — Dewin reviews per program | Calibrated gauges and dimensional records required for FAI reports and PPAP submission to OEM customers |
| Pillar 4 Workforce & Management | Operator training records, technical management capability, production planning, turnover indicators | ✅ Trained press operators and lathe operators confirmed — organized production area observed | Consistent trained workforce = stable quality and on-time delivery across repeat purchase orders |
| Pillar 5 Export Compliance | VCCI registration, Form B issuance history, manufacturing records for COO, multi-FTA CO capability | ✅ Vietnam-registered manufacturer — VCCI Form B and FTA CO documentation available per shipment | COO documentation is the legal basis for FTA tariff benefits — critical for US ($0 Section 301), EU (EVFTA), CPTPP, and UK (UKVFTA) buyers |
Dewin vs Alibaba vs Trade Fair vs Direct Factory
| Factor | Dewin ✅ | Alibaba | Trade Fair | Direct Factory |
|---|---|---|---|---|
| Press tonnage verified on-site | ✅ Physical audit + photo | ❌ Self-reported | ❌ Brochure only | ⚠️ You visit yourself |
| Multi-spindle lathe confirmed | ✅ Dolphin Pillar 2 verified | ❌ No verification | ❌ No verification | ⚠️ Self-reported |
| VCCI Form B / FTA CO managed | ✅ Per shipment | ❌ Buyer's responsibility | ❌ Factory-dependent | ⚠️ Factory-dependent |
| Pre-shipment inspection | ✅ On-ground Vietnam team | ❌ 3rd party at your cost | ❌ Not included | ❌ Travel required |
| Real factory photos (on-site) | ✅ 1,700+ verified photos | ❌ Marketing photos | ❌ Showroom only | ⚠️ Factory-supplied |
| FAI / PPAP documentation | ✅ Managed end-to-end | ❌ Varies by factory | ❌ Not standardized | ⚠️ Your project management |
How Dewin Sources Stamped & Turned Parts Through Our Audited Network
RFQ + DFM Review
Submit drawings or samples. Dewin reviews for stampability and turnability, recommends material, tolerances, and appropriate COO documentation path.
Factory Match + Audit
We match your part to the right Dolphin-audited factory — VietMachine or another network factory. Press tonnage and lathe capability pre-confirmed.
Tooling & FAI
Dewin oversees tooling fabrication on-site. First Article Inspection dimensionally ballooned to your drawing before production approval.
Production + In-Process QC
On-ground oversight during production. Dimensional checks at in-process QC gates. Photo and video updates per milestone.
Pre-Shipment Inspection + COO
AQL sampling per ISO 2859-1 Level II. VCCI Form B or FTA CO issued — your tariff advantage documentation for US, EU, CPTPP, or UK markets.
Global Delivery + Documentation
Full document package: Commercial Invoice, Packing List, Form B or FTA CO, material certs, PSI report. Ready for customs clearance globally.
What Global Buyers Say About Dewin's Vietnam Factory Network
"The team at Dewin is knowledgeable, helpful, patient, and effective. Doing business with their team has been a pleasure. I'm very happy with the quality of parts received."
Francisco García Quintana
LAROME 🇺🇸 — Verified Client
"Dewin Technology's contacts have gone above and beyond to ensure we are satisfied. Overall the experience was excellent and we would highly recommend."
Greg L. Wilhite
President, DOMS 🇺🇸 — Verified Client
"Good quality products and quick response times. Products match descriptions very well. Will continue working with them. Highly recommend."
Vishnu Shanker
Texas Technology 🇺🇸 — Verified Client
Frequently Asked Questions
What is a multi-spindle automatic lathe and why is it a quality signal for buyers? ▼
What FTA market access does Vietnam metal stamping provide to global buyers? ▼
How does the Dolphin Audit verify a stamping factory's real press tonnage? ▼
What types of parts is VietMachine (Ichimens) best suited for? ▼
Why source stamped and turned parts from Dewin's Vietnam network instead of directly? ▼
Source High-Volume Stamped & Turned Parts from Vietnam
VietMachine (Ichimens) — 150-ton press + multi-spindle automatic lathe, Dolphin-audited, VCCI Form B and FTA CO documentation. Dewin manages factory, quality, and compliance from Vietnam to your dock.